Clear Focus

Overview Introduction Features & Specification Accessories Downloads

ERS 6 Blue Edition

The most advanced solar Immersion Controller we've ever made

ERS 6 Blue Edition has all the features of ERS 4 Silver Edition with the addition of dual programmable outputs
that can be set to run a multitude of heating devices at the same time.
In addition these two output can be combined together to run a single 6kW heating device, another industry first.


Class Leading Control

Proactive not Reactive

ERS 6 Blue Edition intelligently considers how much power is being generated and how big each load is.
Each Output can be assigned priority as required dictating how much energy is then diverted to each load.

Combined with the powerful F-POINT technology®  advanced power control,
this ensures that energy is always supplied from the renewable source only and unwanted import doesn't occur.

This is essential in applications where a large amount of energy transfer is being performed.

Dual Outputs

Clever Thinking

The ERS 6 Blue Edition contains 2 x 3kW outputs that can be configured for almost any heating requirement.

In parallel mode each output can be connected to independent heating loads up to 3kW each and assigned a priority,
or they can be combined together to run a single 6kW heating load.

This is all achieve through a single high quality plug and play power connector. 

Total Control

Built in bypass

The ERS 6 Blue Edition incorporates a fully independent manual isolation and by-pass switch 
Simply flick the switch to turn off the unit or by-pass the energy recovery function

The feature can be used if the electrical device is required to be turned on manually or ERS is not required for a period of time 
It can also be used for regulatory safety testing of the heating device without risking damage to your ERS device 

Commercial scale ERS with 3 phase 

Up to 18kW of 3 phase solar recovery with ERS 6 Blue Edition

Designed for solar PV or wind generation systems of 10kW and above, typically found in commercial applications,
ERS 6 Blue Edition can control generated power from as little as a staggering 200 Watts all the way to 18,000 Watts per phase.

ERS 6 Blue Edition is an ideal partner in combination with biomass or heat pump systems.
The ERS 6 Blue Edition can be used to divert exported energy into the accumulator tank helping to reduce wood or electricity cost.

During operation in a 3 phase installation, ERS also helps to correct any phase imbalance,
this results in increased efficiency of any 3 phase equipment that maybe running at the same time. 

Features >>